Injection Molding Machine | HAIJIANG | HJF-100-F5 | Ton 100
Injection Molding Machine | HAIJIANG | HJF-100-F5 | Ton 100
- Type: Tube Head Injection
- Structure: Horizontal
- Plastic Type: Thermoplastic
Pl HAIJIANG plastic parts injection machine features
- bigger space between tie-bars
- central-clamping structure
- famous components
- energy saving with servo motor
- low noise, fast response
- high precision, Stable, and super long life
- T-Slot Platen
- abundant Spare Parts
- better price
Clamping Unit
- Optimized Platen Design with high rigidity and enlarged space between tie bars
- Euromap-based Platen Layout with both T-slot & tap holes, locating design in moving platen to better suit various molds
- New ejection system design with longer ejection stroke, bigger space, and better rigidity
- Hydraulic-driven gear-type mold height adjusting mechanism
- Relocation of mechanical safety interlock for easier operation
- Linkage structure for the front connecting rod increases connecting rod’s strength greatly, as well as the whole clamping u
Injection Unit
- High Quality Linear Motion Guide ensure the smooth & accuracy of injection process
- High Speed & Pressure injection structure can improve the injection speed
- Twin nozzle cylinder ensures more even & stable structure
Hydraulic System
- The double proportional compound valve control system pressure & flow, highly sensitive & stable
- Imported high quality Pump, low in noise, long in lifespan & stable in performance
- World-famous servo hydraulic system optional, better performance in lower noise & energy saving
- The precise feedback control of servo system to the pressure & flow, with higher sensitivity & more accurate repeatability precision
- High performance hydraulic valve, less failure, fast switch, convenient maintenance
- Low pressure mold protect system, which is more suitable for the precise mould
- Greese & lubrication oil in dependent lubrication system can lubricate everywhere in the best situation. Specilized s
Electrical System
- High Quality Linear Motion Guide ensure the smooth & accuracy of injection process
- High Speed & Pressure injection structure can improve the injection speed
- Twin nozzle cylinder ensures more even & stable structure
Servo Controller Part
- High Precise Control The servo system can control the machine’s pressure, speed & location precisely, make sure that the error of accurate repeatability precision for the shot measurement is <0.3%
- High sensitive response Because the motor vector is matched with the controller accurately, it only takes 0.5sec. inputing the number from 0 to max. Compared with other traditional hydraulic injection molding machine, HJ series is more faster in speed with shorter cycle time and high efficient in production
- Low noise Compared with traditional fixed pump & variable pump system, the noise is 1/10 lower under normal circumstance, more suitable for sealed dustless workshop
- Energy Saving Overall efficiency is 10% more & driving capacity is 18% more than common machine. This series can save 40-80% energy, and achieve first-class energy efficency
- Water cooling saving The system condition prevent high pressure uploading without any power output, leads to the water cooling saving exhibited.
ELITE SEVH | SEVH550-330 | Ton (550-3300) Machine Parameter Table
| Parameter | Unit | HJF100-F5 | ||
| Screw diameter | mm | A | B | C |
| 35 | 38 | 40 | ||
| Screw I/D ratio | L/D | 23.9 | 22 | 20.9 |
| shot volumn (theoretical) | Cm3 | 154 | 181 | 201 |
| injection weight(PS) | g | 141 | 165 | 183 |
| injection rate | g/s | 80 | 95 | 105 |
| injection pressure | Mpa | 219 | 186 | 167 |
| screw speed | r/min | 0~220 | ||
| clamp force | KN | 1180 | ||
| opening stroke | mm | 340 | ||
| space between tie bars (W*H) | mm | 370*370 | ||
| max mould height | mm | 400 | ||
| min mould height | mm | 150 | ||
| ejector stroke | mm | 100 | ||
| ejector force | KN | 33 | ||
| ejector number | PC | 5 | ||
| max pump pressure | Mpa | 16 | ||
| pump motor power | KW | 11 | ||
| heating power | KW | 6.5 | ||
| machine dimension | M | 4.2*1.25*1.8 | ||
| machine weight | T | 3.5 | ||
For plastic products-making machines
Visit Us
Come and explore the extensive array of machinery we have to offer. Our inventory is meticulously curated to cater to the diverse requirements of plastic manufacturing businesses. Whether you are in need of cutting-edge injection molding machines, precision-engineered blow molding machines, or high-performance extrusion machines, we have the perfect solution for you. Visit us to discover the machinery that will elevate your production capabilities and bring your plastic manufacturing business to new heights.
